Equipment

iFit Help: Updating Firmware On Your Machine

iFit Help: Updating Firmware On Your Machine

As you continue to exercise on your iFit® enabled NordicTrack equipment, it is important to update your firmware on your machine to make sure everything is running the way it should be. As the manufacturer makes improvements to the programs as time goes on, updates will be made available to you.

If your machine is connected to WiFi™ then your updates will be done automatically. If you’re connected via Bluetooth®, you will get notification that a firmware update is available, and you can access this update by using your app.

You can also check for firmware updates manually. Just follow the steps below:

  1. Go to the app settings.
  2. Check for firmware updates.
  3. Select the update, if available.
  4. While your machine is updating, keep the app open and near your machine until the update finishes. Do not disconnect or disable Bluetooth® during the update.
  5. Depending on your WiFi™ connection, the update may take 15–20 minutes. During that time, the screen on your equipment and tablet may go dark.

If the update happens to fail, close the app, and open the app again. Attempt the firmware update until it’s worked successfully.

For more information on this topic, see the iFit® Blog. And for further iFit® support, please see here!



DISCLAIMER: This post is not intended to replace the advice of a medical professional. The above information should not be used to diagnose, treat, or prevent any disease or medical condition. Please consult your doctor before making any changes to your diet, sleep methods, daily activity, or fitness routine. NordicTrack assumes no responsibility for any personal injury or damage sustained by any recommendations, opinions, or advice given in this article.


Sources:

https://www.nordictrack.com/treadmills
https://www.nordictrack.com/learn/connecting-ifit-to-your-bluetooth-equipment/
https
://blog.ifit.com/update-firmware-equipment/
https
://ifit.zendesk.com/hc/en-us